New fascia board at the roof edge

Full tear-off, deck check, and a clean yard when we leave

Roof Replacement in Conroe, TX, Built for Pine Country

When shingles are curling, granule loss is filling the gutters, or a storm has done its worst, roof replacement in Conroe starts with a full tear-off, not a layover. We strip the old roof down to the deck, check every sheet of sheathing, and install a complete system — underlayment, valley protection, new flashing, pipe boots, and ridge vent — built for Montgomery County heat, hail, and pine shade. You get an inspection first, then a written scope, before any work starts. For the figures behind the scope, see what drives the cost of a roof replacement in Conroe.

Written scope before work startsFull tear-off to the deckMon–Sat 8 AM–8 PM
Call firstLive triage can help before arrival
Safety before speedRisks assessed before work begins
Diagnose the causeWe trace the source, not just the symptom
Approve the workScope and price explained upfront

What's included

What Every Roof Replacement Includes

Every replacement we do in Conroe is a full system, not just shingles. Here is what is included in the standard scope, and what we quote separately when your roof needs it.

01

Complete Tear-Off and Disposal

We strip every layer of the old roof down to the deck and haul it away. No layovers, no shortcuts — and the deck gets inspected sheet by sheet before new material goes down.

02

Deck Check and Sheathing Repair

The scope includes an allowance for rotten or delaminated sheathing. If we find more than the allowance covers, we stop, show you the photos, and get your approval before replacing it.

03

Underlayment and Valley Protection

Synthetic underlayment across the field and a waterproof layer in valleys, around penetrations, and along the eaves. This is the layer that keeps water out when a shingle fails.

04

New Flashing and Pipe Boots

New chimney flashing, step flashing, drip edge, and vent pipe boots on every job. Reusing old flashing is the fastest way to inherit a leak, so we replace it as part of the system.

05

Ridge Vent and Ventilation Balance

Ridge vent sized to your attic goes on every replacement, balanced with intake vents. Ventilation is what keeps attic temperatures down and helps the new roof age the way it should.

06

Permit Check and Final Cleanup

Inside Conroe city limits, a straight re-roof needs no permit unless the sheathing or rafters need replacing — we confirm which applies to your job before work starts. Then we magnet-sweep the yard, driveway, and gutters, and walk the roof with you.

Service overview

What Roof Replacement in Conroe Really Involves

Roof replacement in Conroe is the full removal of your existing roofing material down to the wood deck, followed by inspection and repair of the sheathing, installation of new underlayment and valley protection, and a complete new roof system finished with flashing, ridge vent, and pipe boots. It is not a layover. We strip every course, then run a moisture meter across the deck to catch soft spots before new material goes down.

Much of Conroe grew fast — from about 36,800 people in 2000 to roughly 114,600 in 2024 — so whole subdivisions carry builder-original shingles that reach the end of their life together. In this climate, asphalt shingles commonly last 15 to 25 years, not the 25 to 30 you hear in cooler, drier places: heat, UV, humidity, and pine shade wear them down. If your home sits in a master-planned community such as Grand Central Park, Woodforest, April Sound, or Bentwater, the homeowners association usually needs to approve the shingle colour and profile before work starts — Texas Property Code §202.011 protects wind- and hail-resistant shingles that resemble the ones already allowed in the community, but the approval step itself still applies.

Cohort-ageing roofsConroe grew from about 36,800 people in 2000 to roughly 114,600 in 2024, so builder-original shingles across whole subdivisions reach the end of their life together.
The deck decides the jobTear-off is the only honest deck inspection. Shaded pine lots can hide rotten sheathing under needle litter, and the deck is what turns a straight re-roof into a bigger job.
No permit for a straight re-roofInside Conroe city limits, a straight re-roof needs no permit unless the sheathing or rafters need replacing — and that is exactly what the tear-off can reveal.
Porch roof tie-in
How we workWe verify the cause, compare realistic options, and confirm the scope before work starts.

The service timeline

How Our Roof Replacement Process Runs

The process flexes to the condition of your roof, but these checkpoints keep decisions clear.

01

Inspection

We walk the roof, check the deck from the attic side, and run a moisture meter around penetrations. You get photos, a written scope, and a clear answer on the question every owner asks — roof repair or full replacement: how to decide.

Stage 1
02

Scope and Materials

We price the job line by line, including tear-off, the decking allowance, underlayment, flashing, ridge vent, and disposal. You pick the shingle line and colour, and we confirm the HOA approval step and lead time before scheduling.

Stage 2
03

Tear-Off and Deck Check

The crew strips the old roof, hauls it away, and inspects every sheet of decking. Rotten or delaminated sheathing gets replaced before anything new goes down — and if the sheathing needs replacing, we explain the permit step that goes with it.

Stage 3
04

Install and Dry-In

Valley protection goes in the valleys and around penetrations, then underlayment across the field. New flashing, pipe boots, and ridge vent go on, and the shingles are nailed to the manufacturer pattern. The crew dries the roof in before leaving for the day.

Stage 4
05

Cleanup and Walk-Through

We magnet-sweep the yard, driveway, and gutters for nails, then walk the roof with you. You get a written record of the work and photos of the deck and details, and we answer every question before we leave.

Stage 5

Tools methods

Tools and Methods We Use on Every Roof

Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.

01

Shingle ripper and pry bar

Used to strip old shingles and underlayment without damaging the deck. A clean tear-off is what makes the deck inspection meaningful.

02

Roofing nail gun

Sets field shingles at the manufacturer-specified nailing pattern. Correct nailing is what holds the roof on in a wind event.

03

Moisture meter

Finds soft decking and traces leaks to the actual source, whether that is chimney flashing, a vent pipe boot, or a skylight.

04

Chalk line and roofing hammer

Keeps courses straight and handles detail work around valleys, ridges, and penetrations where a nail gun does not fit.

05

Roof safety harness and ladder stabilizer

Fall protection and stable ladder access on every job, on every pitch.

06

Tin snips and metal brake

Cuts and forms metal flashing and drip edge on site so the details fit the roof instead of being forced.

Use cases

When Conroe Homeowners Call Us for Replacement

These examples show how the service framework adapts rather than forcing every call through one repair.

Detached garage roof
Hail-Damaged Roof in River PlantationA 19-year-old architectural shingle roof with hail bruising across the south and west slopes, granules filling the gutters, and two leaks over the master bedroom — patched twice in three years. The scope for a roof like this is a full tear-off, replacement of delaminated decking, new synthetic underlayment, valley protection, and a new architectural shingle system with ridge vent.

Curling Shingles in Grand Central Park

A newer home with curled shingles on the south slope and an attic running hot in summer. The original roof had minimal exhaust ventilation, and the shingles were ageing faster than they should. The scope starts with a ventilation check — ridge vent and intake balance — alongside the tear-off, so the new roof is not fighting the attic from day one.

Third Roof in April Sound

A 1970s lake home, often on its third roof, with open-water wind exposure and no canopy break. The scope weighs wind-rated shingles and extra fasteners on lake-facing slopes, with the HOA architectural review step handled before materials are ordered.

Problems we solve

Roof Problems We Solve for Conroe Homeowners

Most of the calls we get in Conroe trace back to one of these problems. Here is what they look like and what happens if they are left alone.

ISSUE

Curling and cracked shingles across multiple slopes

When shingles are failing across multiple slopes, a repair will not buy you much time. We do a full tear-off and replace, inspect the deck, and install a new system with fresh underlayment so the whole roof resets at once.

SYMPTOM

Chimney flashing and vent pipe boot leaks

We trace the leak with a moisture meter, then rebuild the flashing or replace the boot. On a replacement, every penetration gets new flashing and new boots as part of the scope — see roof repair if only one detail has failed.

SIGN

Hail and wind damage after a storm

We inspect after the storm, document damage with photos and measurements, and meet your adjuster on site. If the damage warrants it, we handle the full replacement and write the scope to match the documented damage — see storm damage roof repair.

ALERT

Clogged gutters and attic ventilation issues

We check gutters and fascia during replacement and balance attic ventilation as part of the job. Ridge vent and proper intake vents go on every replacement so the new roof is not fighting the attic — see attic ventilation.

How an estimate works

How Your Roof Replacement Estimate Is Put Together

We do not publish prices — no two Conroe roofs cost the same to replace, and the deck cannot be priced until the old roof comes off. Here is what shapes the estimate, and what you will see in it.

Phase 01

Roof size and pitch

Square footage sets the material quantity, and steep pitches slow the crew down and need more safety setup. A steep two-story roof takes longer per square than a walkable single-story.

Phase 02

Shingle line and material

Entry-level architectural shingles sit at one end; premium lines, impact-resistant shingles, and metal sit at the other. The material choice also affects how the roof handles hail and branch abrasion.

Phase 03

Deck condition

Soft or delaminated sheathing has to be replaced once the old roof comes off. We include an allowance in the scope and show you the photos if we find more.

Customer reviews

What Conroe Homeowners Say

5.0★★★★★19 Google reviews
★★★★★

Mr. Britt Cartwright and his crew made the investment worthwhile indeed specially knowing that they also have the needed experience working with the solar panel company to get the panels re-installed right the first time!

★★★★★

We were referred to Britt from someone else in our neighborhood. I cannot say enough good things about this company. They delivered an amazing roof and made sure we were happy every step of the way.

★★★★★

Just got a new roof with Squared Up Roofing on June 29, 2024 and I am very pleased! Mr. Britt and his team showed up and showed out. Mr. Britt operates with great Integrity and is a great person as well.

★★★★★

What can you say about a company that actually does what they promise!! Well Squared Up truly is that company. I was pretty nervous about replacing my roof but Britt walked me through the entire process and was there for me every step of the way.

Questions before we arrive

Roof Replacement Questions Conroe Homeowners Ask

Roofer in a safety harness carrying a bundle of shingles up an extension ladder, seen from behind
Call (936) 693-8377
How much does a roof replacement cost in Conroe TX?

We do not publish a price, because no two Conroe roofs cost the same to replace. Size, pitch, material, and deck condition all move the figure, and the deck cannot be priced until the old roof comes off. What we do is measure the roof, inspect it, and give you a written, line-by-line scope before any work starts, so you can see exactly what is included.

How long does a roof replacement take in Conroe?

It depends on the size of the roof, the pitch, and the weather. Most Conroe homes are torn off and dried in before the crew leaves for the day, and the crew picks up where it stopped if a storm rolls in mid-job. Larger homes, steep pitches, and metal roofs take longer. Your written scope sets out the expected sequence before work starts.

Do I need a full roof replacement in Conroe, Texas?

You need a full replacement when the deck is failing, shingles are curling or cracking across multiple slopes, or repairs are stacking up faster than they pay off. A single damaged slope or one flashing leak is usually a repair. We inspect the roof and attic, run a moisture meter, and tell you which one you are looking at before you spend anything.

Do I need a permit to replace my roof in Conroe?

Inside Conroe city limits, a straight re-roof needs no permit unless the structural sheathing or the rafters need replacing — and the tear-off is often what reveals that. If decking does need replacing, we explain the permit step before that work starts. Commercial re-roofs are treated differently, so we confirm the scope with the city for those.

Ready when you are

Get Your Roof Replacement Estimate in Conroe

One inspection, a written scope, and a straight answer on repair versus replacement. Call (936) 693-8377, Monday to Saturday, 8 AM to 8 PM.

Roof deck plywood before underlayment

Talk with the local team

Request Roof Replacement

Call (936) 693-8377 to book a roof inspection or talk through a replacement. We answer during business hours, Monday to Saturday, 8 AM to 8 PM, and return after-hours calls the next business morning.

16454 Hickory Rd, Conroe, TX 77302, United StatesMain office technicians serve the full area

Thanks — your request is in. We will contact you shortly.

Call now